{"id":1153,"date":"2018-12-07T22:35:03","date_gmt":"2018-12-07T22:35:03","guid":{"rendered":"https:\/\/www.gardendad.co.uk\/?p=1153"},"modified":"2024-01-01T12:49:14","modified_gmt":"2024-01-01T12:49:14","slug":"how-to-move-a-shed","status":"publish","type":"post","link":"https:\/\/www.gardendad.co.uk\/how-to-move-a-shed\/","title":{"rendered":"How To Move A Shed: Comprehensive Guide"},"content":{"rendered":"

Moving a shed in your garden<\/a> might be a complicated or simple task, depending on many factors such as the employed technique, the distance, and the shed\u2019s condition and size. In most cases, however, it is essential to prepare carefully in advance to make sure everything happens as planned.<\/p>\n

Be safe and smart to avoid any drainage issues, get less or more sunlight, and update the design of your garden. Here are our step-by-step guides on how to move a shed with different methods.<\/p>\n

How to lift a shed<\/h2>\n

Before moving your shed, the first thing<\/strong> you need to do is lifting it up from the ground. Firstly, make sure to support any weak point beforehand to avoid any issues during and after moving. Remove all windows because any warping or shifting of the structure would break them.<\/p>\n

To keep the shed in its shape, you should attach boards with screw or nails from all corners on the wall. Also, consider adding additional some diagonal supports across door and window openings because these are often weak points.<\/p>\n

Next<\/strong>, you need to dig under the structure to set up the jacks. You can choose to dig 4 holes at 4 corners or 2 holes in the middle. If you don\u2019t have the right tool for digging, then consider lifting the shed and fit the jacks underneath.<\/p>\n

Jack up the shed to the necessary height. In most cases, you should set up multiple jacks to lift the whole structure at the same time. If you are planning to roll the shed on pipes, you might need to raise the shed a little bit higher to place the pipes and tracks. Keep in mind to ensure all supports and jacks are secure and level.<\/p>\n

Move a shed by hand<\/h2>\n

Step 1: Prepare tracks and pipes<\/h3>\n

If you want to move the shed across your backyard, it is possible to roll it on a belt of pipes. Firstly, you need to select pipes which are long and sturdy enough to endure the weight of the shed. Thicker-walled pipes with a radius of around 2 inches will often ideal for small units.<\/p>\n

Next, space out 3 pipes under the shed so that they are perpendicular to the moving. If you are moving on a soft ground, create the tracks with 2 pairs of wide, longboards to roll these pipes.<\/p>\n

Step 2: Roll and reposition<\/h3>\n

Once you have already set up the tracks and pipes, push your shed slowly in the needed direction. It is essential to plan and control your movements carefully and estimate the total weight to get additional assistance. More helpers are always better to keep the shed in the track.<\/p>\n

Also, reposition the tracks often so that they can stay under the pipes. Repeat this step until the structure reaches the destination.<\/p>\n

Step 3: Reverse the process of lifting<\/h3>\n

After reaching the destination, simply push your shed off pipes. If it is large or not sturdy, you should use the jacks or have other people support in easing the shed back to place. Keep in mind to prepare the destination area so that it is level.<\/p>\n

Watch the following clip to learn more about moving your shed by hand:<\/p>\n